GReddy EVOlution GT Scion FR-S 2013-
Car Make: Scion
Car Model: FR-S
Car Year: 2013-
Notes:
The EVOlution GT for the Scion FR-S & Subaru BRZ features dual angled Evo mufflers for a stylish and aggressive layout. Large 76mm (3”) piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow. This creates and improved performance and sound for both turbocharged and normally aspirated applications. The system is finished off with high polished piping and our classic Evo 115mm laser engraved GReddy tip. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.
Chassis: ZN6
Engine: 4U-GSE (FA20)
Type: Cat-back system
(dual angled mufflers, with extended tips)
Number of pieces: 3
Piping: 76 mm (3.0")
Tip(s): 2x 115mm (4.5")
Gasket(s): 3.0" oval (qty: 2 included) replacement
Resonator: Yes
Notes: reuse factory doughnut-gasket and spring bolts for mid-pipe
Weight: TBA lbs
Sound level: TBA dB(a) @4500RPM
Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs
*Also see our GReddy Air Intake System for the FR-S / BRZ*
*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced
Part #: 10118300
Car Model: FR-S
Car Year: 2013-
Notes:
The EVOlution GT for the Scion FR-S & Subaru BRZ features dual angled Evo mufflers for a stylish and aggressive layout. Large 76mm (3”) piping is carefully routed through a large resonator in the mid-pipe and round the rear differential to a centralized Y-section for more even flow. This creates and improved performance and sound for both turbocharged and normally aspirated applications. The system is finished off with high polished piping and our classic Evo 115mm laser engraved GReddy tip. Like all GReddy EVOlution GT systems this fully hand-welded 304 Stainless-Steel exhaust carries a Limited Lifetime Warranty.
Chassis: ZN6
Engine: 4U-GSE (FA20)
Type: Cat-back system
(dual angled mufflers, with extended tips)
Number of pieces: 3
Piping: 76 mm (3.0")
Tip(s): 2x 115mm (4.5")
Gasket(s): 3.0" oval (qty: 2 included) replacement
Resonator: Yes
Notes: reuse factory doughnut-gasket and spring bolts for mid-pipe
Weight: TBA lbs
Sound level: TBA dB(a) @4500RPM
Dyno Chart
HP: TBA hp
TRQ: TBA ft-lbs
*Also see our GReddy Air Intake System for the FR-S / BRZ*
*Data collected on stock vehicle *Retains catalytic convertor, front pipe
*TBA = To Be Announced
Part #: 10118300